Multi - Color 2mm 3mm Thickness Esd Static Dissipative Flooring For Server Room

Static electricity swoon everywhere in our daily life,there might be super high static electricity voltage around us or surrounded the body,thousands of volts or even ten thousands of volts.35,000 volts of static electricity generates when walking pass the chemical fiber carpet,about 7000 volts when reading plastic manuals,which might bot be felt by people,however it's fatal hazards to some sensitive equipments.Static electricity hazards may cause very serious consequences and losses.It could inadvertently shoot expensive devices,resulting in billions of dollars losses in electronics industry annually……
         Nowadays people increasingly realize the importance and necessity of ESD protection,while the anti-static PVC floor system is the top priority of electrostatic protection.Perfet anti-static PVC floor system could prevent static electricity from generation,release static electricity into the earth to prevent accumulation of dust.
        Anti-static PVC floor has been widely applied to e-shop,clean rooms,communication rooms and other precision instruments and rooms for equipment operation.

 

Installation
Conductive tile and Static-Dissipative tile should be installed on sub floors that are leveled, smooth and free of cracks. Residual humidity should be under 2.5% tested with the CM Dumb test. Tiles, adhesive, and installation site should reach a temperature of at least 18℃ at least 24 hours before installation, and paste the tiles with qualified conductive glue below 10^5Ohm.
For further details on installation methods, pls contact with us.

Care and maintenance
Clean floor by machine-scrubbing with a good neutral detergent. Lightly soiled floors may be damp mopped but also should be periodically machine-scrubbed. Severe soiling or back marking can be removed with a floor cleaning machine, synthetic stripping pad and a commercial stripping solution. Clear water rinsing is necessary after any scrubbing or stripping operation to remove all cleaner Floor maintenance should apply spray and grinding.
If necessary, you can maintenance the surface of Brick by conductive wax periodically.

thickness	packing details
2mm	28pcs/box ,32-36box/pallets,13pallests/20GP,4500sqm/20GP
3mm	28pcs/box ,30-32box/pallets,13pallests/20GP,3200sqm/20GP