Anti Static PVC Flooring For Electronic Factory Thickness 2mm
Static electricity swoon everywhere in our daily life,there might be super high static electricity voltage around us or surrounded the body,thousands of volts or even ten thousands of volts.35,000 volts of static electricity generates when walking pass the chemical fiber carpet,about 7000 volts when reading plastic manuals,which might bot be felt by people,however it's fatal hazards to some sensitive equipments.Static electricity hazards may cause very serious consequences and losses.
Nowadays people increasingly realize the importance and necessity of ESD protection,while the anti-static PVC floor system is the top priority of electrostatic protection.Perfet anti-static PVC floor system could prevent static electricity from generation,release static electricity into the earth to prevent accumulation of dust.
Anti-static PVC floor has been widely applied to e-shop,clean rooms,communication rooms and other precision instruments and rooms for equipment operation.
Conductive tile and Static-Dissipative tile should be installed on sub floors that are leveled, smooth and free of cracks. Residual humidity should be under 2.5% tested with the CM Dumb test. Tiles, adhesive, and installation site should reach a temperature of at least 18℃ at least 24 hours before installation, and paste the tiles with qualified conductive glue below 10^5Ohm.
For further details on installation methods, pls contact with us.